Product ID:INTERSLEEK TIE COAT LIGHT GRAY BASE, BXA386
MSDS Date:03/30/1994
FSC:8010
NIIN:00N057447
MSDS Number: BWQRC

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 800-854-6813

Info Phone: 800-223-0154

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

4 @ 20C.

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

PREVENT SKIN CONTACT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CAN CAUSE IRRITATION
W/REDNESS, TEARING & BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. INHAL:IRRITATION OF RESPIRATORY TRACT, HEADACHE,
DIZZINESS & UNCONSCIOUSNESS. INGEST:MAY CAUSE GASTRO-INTESTINAL
IRRITATION. CHRONIC:OVEREXPOSURE TO, & MISUSE OF, SOLVENTS HAS BEEN
LINKED TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE.
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY CONDITIONS.

First Aid:EYE:FLUSH IMMEDIATELY W/COPIOUS QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:REMOVE
CONTAMINATED CLOTHING. WASH SKIN W/PLENTY OF SOAP & WATER. LAUNDER
CLOTHES B EFORE REUSE. INHAL:REMOVE TO FRESH AIR.GIVE ARTF RESP IF
NEEDED. GET MEDICAL ATTENTION. INGEST:CALL MD IMMEDIATELY TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.

Flash Point Method:SCC
Flash Point:93.0F,33.9C
Lower Limits:2.7%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST NOT(SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS W/NFPA CLASS GIVEN BY OSHA.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED W/THIS PRODUCT. RECOMMEND GROUNDING &
BONDING OF CONTAINERS WHEN TRANSFERRING LIQUIDS & POWDERS TO AVOID
STATIC CHARGE BUILD UP.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
A NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS,
USE A NIOSH/MSHA AP PRVD RESP I/A/W 29 CFR 1910.134 (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIMS SPECIFIED & TO REMOVE DECOMP(SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR APPROP IMPERVIOUS PROT CLTHG TO (ING 2)
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:BE USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT. RESP PROT:TO REMOVE COMBINATION OF PARTICULATES & VAPS. VE
NT:PRODS DURING WELDING/FLAME CUTTING ON SURFS COATED W/THIS PROD.

Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.56
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:23(WT)

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.